SECO μQ7-A75-J

μQseven® standard module with NXP i.MX6 Processor

The extremely low power and low cost μQseven Rev. 2.0 Compliant Module with the NXP i.MX 6 Processor features all the processor and integrated native I/O capabilities of the SoC, in compliance with the Qseven standard, at the competitive cost of a proprietary module. This board is supplied with a complete and fully-featured BSP, for easy migration from, and to, the entire i.MX 6 product family, along with dedicated hardware and software development support.

Digital Signage / Módulos
Energía
Gaming
Industria
Kiosk
Medicina
Seguridad
Transporte

HDMI
Linux
USB

Specifications

Processor	NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors - i.MX6S Solo - Single core up to 1GHz - i.MX6DL Dual Lite - Dual core up to 1GHz per core
Max Cores	2
Memory	Up to 1GB DDR3L on-board (up to 512MB with i.MX6S Solo) 32-bit I/F
Graphics	Dedicated 2D Hardware accelerator Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D Supports 2 independent displays
Video Interfaces	1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface HDMI Interface
Video Resolution	LVDS, resolution up to 1920x1200 HDMI, resolution up to 1080p
Mass Storage	On-board eMMC drive, up to 8 GB SD / MMC / SDIO interface Internal SPI Flash for booting
Networking	Fast Ethernet (10/100) interface
USB	1 x USB OTG interface 1 x USB 2.0 Host interface
PCI-e	1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)
Audio	I2S / AC’97 Audio Interface
Other Interfaces	On the card edge connector, many pins can be used as General Purpose I / Os or to implement some() of the following extra functionalities: - Additional SD interface - Up to 4 UARTs - CAN interface - Watchdog(s) - I2C interfaces - PWM outputs - SPI interface - Additional Audio interface () not all the combinations are allowed simultaneously Power Management Signals
Power Supply	+5VDC ± 5% Optional Low Power RTC
Operating System	Linux Yocto
Operating Temperature	0°C ÷ +60 °C (commercial temp.)* -40°C ÷ +85°C (Industrial temp.)* *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
Dimensions	40x70 mm (1.57” x 2.76”)