Utilizamos cookies propias y de terceros para ofrecer nuestros servicios y recoger datos estadísticos. Continuar navegando implica su aceptación. Más información Aceptar
Industria / Placas
«Volver

SECO SBC-C20

SBC with NXP i.MX 8M Applications Processors in 3.5" form factor

SBC-C20 is an SBC built upon the NXP i.MX 8M Application Processors characterised by HEVC/VP9 decoding in 4Kp60 as well as HDR. As for the memory, it features a DDR3L RAM. Moreover, it provides an optimized IoT stack with preinstalled Wind River Linux 10. The range of connectivity options is particularly broad, with optional Wi-Fi and BT LE 4.2 module, M.2 socket 2 Key B for WWAN modules. Interestingly, it also features a Cortex-M4 for RTOS, the real-time operating system for serving real-time applications that process data as it comes in without buffer delays.

Industria / Placas
Kiosk
Medicina
Smart City
Transporte
  • Android
    Android
  • HDMI
    HDMI
  • Linux
    Linux
  • USB
    USB
  • Wifi
    Wifi

Specifications

Processor

NXP i.MX 8M Family, based on ARM® Cortex®-A53 MPCore + Cortex-M4 core platform: 
i.MX 8M Quad - Quad core up to 1.5GHz 
i.MX 8M QuadLite - Quad core up to 1.5 GHz per core 
i.MX 8M Dual - Dual core up to 1.5 GHz per core 

Memory

Soldered down DDR3L memory, up to 2GB

Graphics

Vivante GC7000Lite GPU, supporting OpenGL ES 1.1 / 2.0 / 3.0 / 3.1, Open CL 1.2 and Vulkan 
Dedicated VPU (not for QuadLite), supporting 4Kp60 HEVC/H.265 main and main 10 decoder, 4Kp60 VP9 decoder, 4Kp30 AVC/H.264 decoder, 1080p60 MPEG-2, MPEG-4p2, VC-1, VP8, RV9, AVS, MJPEG, H.263 decoder 
Dual Display support

Video Interfaces

embedded Display Port 1.4 connector (switched with HDMI) 
Optional LVDS interface 
Optional HDMI 1.4 / 2.0a interface (switched with eDP) 
4-lane MIPI_CSI Camera interface

Video Resolution

HDMI, eDP: up to 4096x2160
LVDS: up to 1920x180 

Mass Storage

Optional eMMC drive on-board, up to 16GB 
microSD Card slot

Networking

Optional WiFi + BT LE 4.2 module with two antennas + Optional U.FL connectors on-board 
Gigabit Ethernet port 
M.2 Socket 2 2260 / 3042 Key B slot for WWAN modules (modem)

USB

USB OTG on USB 2.0 micro-AB connector for recovery only 
USB 3.0 Type-A connector (or optional dedicated connector for USB 2.0 touch screen controller) 
USB 2.0 Dual Type-A connector

Audio

I2S Audio Codec 
Speaker + Microphone + Earphone interfaces on internal pin headers 
Line Out + Mic In combo TRRS audio jack 
Optional 10W for channel amplified Speaker connector

Serial Ports

RS-232 Serial port connector 
Debug UART on internal pin header 
CAN Port

Other Interfaces

microSIM slot for M.2 modems 
SPI interface 
I2C Touch Screen dedicated connector 
I2C connector 
8 x GPI/Os connector 
SPI Connector

Power Supply

+12VDC
Coin cell battery for RTC

Operating System

Wind River Linux LTS 
Yocto 
Android

Operating Temperature

0°C ÷ +60°C (Commercial version) 
-40°C ÷ +85°C  (Industrial version)

*Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

Dimensions
101.6 x 147 mm (4” x 5.78”)