Utilizamos cookies propias y de terceros para ofrecer nuestros servicios y recoger datos estadísticos. Continuar navegando implica su aceptación. Más información Aceptar
Kiosk / Placas
«Volver

SECO SBC-A62-J

SBC with NXP i.MX 6 Processor
Low-end Single Board Computer with NXP i.MX 6 Processor, that exploits the potential of a configurable expansion connector, to fully meet the configuration flexibility needs. Thanks to its features, the new Single Board with the i.MX6 is ideal for applications in digital signage, infotainment and in all general purpose contexts requiring multimedia capabilities, high performance and high levels of parallel computing for the reproduction of relevant and/or engaging contents.
Kiosk / Placas
Medicina
Smart City
Transporte
  • Android
    Android
  • Linux
    Linux
  • USB
    USB
  • Wifi
    Wifi

Specifications

Processor

NXP i.MX 6 Family, based on ARM Cortex-A9 processors:
SBC-A62-J-SOLO: Single Core (i.MX6S) @1GHz
SBC-A62-J-LITE: Dual Core Lite (i.MX6DL) @1GHz
SBC-A62-J-PLUS: Dual Core Plus (i.MX6DP) @1GHz
SBC-A62-J-QUAD: Quad Core (i.MX6Q) @1GHz

Max Cores
4
Memory

Soldered on-board DDR3L memory***:
SBC-A62-J-SOLO: 512MB 32-bit interface
SBC-A62-J-LITE: 1GB 64-bit interface
SBC-A62-J-PLUS: 2GB 64-bit interface
SBC-A62-J-QUAD: 1GB 64-bit interface

*** For additional configurability please contact SECO

Graphics

Integrated Graphics, with up to 3 separate HW accelerators for 2D, OpenGL® ES2.0 3D
OpenVG™ accelerator (only SBC-A62-J-PLUS and SBC-A62-J-QUAD)
HW encoding of MPEG-4, H.263 V2, H.264, MJPEG
HW decoding of MPEG-2, VC1, MPEG-4 / XviD, H.263, H.264, DivX
SBC-A62-J-SOLO and SBC-A62-J-LITE support up to 2 independent displays
SBC-A62-J-PLUS and SBC-A62-J-QUAD support up to 3independent displays

Video Interfaces

1 x Dual Channel or 2 x Single Channel 18 / 24 bit LVDS interface
HDMI interface 1.4

Video Resolution

HDMI: up to 1920 x 1080p
LVDS: up to 1920 x 1200

Mass Storage

4GB eMMC drive soldered onboard*** 
microSD Card slot 
SBC-A62-J-PLUS and SBC-A62-J-QUAD: SATA connector

*** For additional configurability please contact SECO

Networking

Gigabit Ethernet connector
Internal USB connector for Wi-Fi Module

USB
2 x USB 2.0 Type-A ports and 1 x USB 2.0 internal connector
USB micro-B Client port
Audio

SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD:
AC’97 Audio Codec Realtek ALC655 with Mic-In, Line-Out audio Jacks

Serial Ports

Debug UART interface, TTL voltage level.
SBC-A62-J-LITE, SBC-A62-J-PLUS and SBC-A62-J-QUAD: dedicated CAN Bus connector (Transceiver CAN 3.3V)
Other serial interfaces on the expansion connector:
SBC-A62-J-SOLO: 1 x Serial (TTL level) - 2 x Serial (RS-232) -2 x CAN (TTL level);
SBC-A62-J-LITE: 1 x Serial (TTL level) - 2 x Serial (RS-232) - 1 x CAN (TTL level);
SBC-A62-J-PLUS and SBC-A62-J-QUAD: 1 x Serial (RS-485) - 2 x Serial (RS-232) - 1 x CAN (TTL level)

Other Interfaces

Dedicated connector (I2C, GPIO signals) for external Touch Screen controller; MIPI-CSI Camera connector;
Configurable* expansion connector with: Up to 28 GPIO - SPI interface - SPDIF Audio interface - CAN interface (TTL level) - SDIO interface - 3 x PWM - I2C - UARTs

* Please note that some of these interfaces are factory options, other configurations are made via SW.

Power Supply

+12VDC; Additional embedded Low Power RTC;
SBC-A62-J-SOLO and SBC-A62-J-LITE: internal i.MX6 Real Time Clock (external battery required for time/date retention, not included)
SBC-A62-J-PLUS and SBC-A62-J-QUAD: low power Real TimeClock with onboard battery

Operating System

- Free Android and Linux community BSP available at UDOO.org
- SECO Android (under development) and Linux BSP / WEC7 on request. Please contact us
Yocto Guideline valid for SECO BSP

Operating Temperature

0°C  ÷ +60 °C (commercial temp.)**
For industrial temp. (-40°C ÷ +85°C)** please contact us

*Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

Dimensions
110 x 86.5 mm (4.5” x 3.7”)