Seco SBC-C57
Single Board Computer with NXP i.MX 8X Applications Processors in 3.5” form factorSpecifications
Processor
NXP i.MX 8X family SoCs: Dual or Quad ARM Cortex®-A35Cores + 1x Cortex® M4F core for real-time processing• NXP i.MX8 QuadXplus, 4x ARM Cortex®-A35 Cores + 1xCortex® M4F core for real-time processing• NXP i.MX8 DualXplus, 2x ARM Cortex®-A35 Cores + 1xCortex® M4F core for real-time processing
Max Cores
4+1
Memory
Soldered down LPDDR4 memory @ 1200MHz, 32-bit interface, up to 4GB
Graphics
Embedded GC7000Lite GPUSupports OpenGL 3.0, 2.1, OpenGL ES 3.1, OpenCL 1.2 FullProfile and 1.1, OpenVG 1.1, and VulkanEmbedded VPU, supports HW decoding of HEVC/H.265,AVC/H.264, MPEG-2, VC-1, RV10, VP8, H.263 andMPEG4.2t, HW encoding of AVC/H.2642 independent displays supported
Video Interfaces
Factory options:• eDP 4-lane interface + LVDS single Channel 18-/24-bitinterface• LVDS Dual Channel / 2 x LVDS Single Channel interface
Video Resolution
Up to 1080p60
Mass Storage
Soldered onboard eMMC 5.1 Drive, up to 64GBQSPI NOR Flash soldered on-board
Networking
Up to 2 x Gigabit Ethernet portsOn-board WiFi 802.11 a/b/g/n + BT LE 4.2 module, optional
USB
1x USB 3.0 Host ports on USB 3.0 Type-A socket1x USB OTG Port on micro-AB connector (interface shared with USB 2.0 interface of USB 3.0 Type-A socket)2x USB 2.0 Host ports on Dual Type-A socket1x USB 2.0 Host port on miniPCI-e Slot
PCI-e
Optional mini PCI-e Slot
Audio
I2S Audio codecMic In + Hp-Out on TRRS combo connectorLine Out + 2x Mic-In interfaces on internal connector
Serial Ports
1x UART on expansion connector, optionally with RS-232interface1x UART on expansion connector, optionally with RS-485interface1x CAN port, available at TTL Level on expansion connectoror with CAN transceiver on dedicated connector2x Debug UARTs on dedicated connectors
Other Interfaces
Available on expansion connector:• 16x GPIOs• I2C interface• 2x analog inputs• 1x PWMPower and reset button input on dedicated connector
Power Supply
Factory option, +12VDC or +24 VDC input voltageDC power jack or 2-poles PCB terminal block for voltagesupplyRTC battery
Operating System
Linux
Operating Temperature
-40°C ÷ +85°C (Industrial version) *Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.
Dimensions
146 x 102 mm (3,5'' form factor)