Utilizamos cookies propias y de terceros para ofrecer nuestros servicios y recoger datos estadísticos. Continuar navegando implica su aceptación. Más información Aceptar
Industria / Módulos
«Volver

SECO SM-B71

SMARC Rel. 2.0 compliant module with the Xilinx® Zynq® Ultrascale+™ MPSoC
The SM-B71 is a SMARC Rel. 2.0 compliant module with the Xilinx® Zynq® Ultrascale+™ MPSoC. Delivering flexibile ARM + FPGA Heterogeneous processing in a standard form factor, this solution is able to merge wide scalability, from cost effective Dual-Core to high performance Quad-Core ARM® Cortex®-A53 MPSoCs with GPU/VCU, and extreme flexibility (up to 256k FPGA logic cells). It also features dedicated Real-Time ARM® Cortex®-R5 processors, along with LVDS and DP video interfaces up to 4K resolution and high-speed interfaces.
Industria / Módulos
Medicina
Seguridad
Smart City

Specifications

Processor

Xilinx® Zynq® Ultrascale+™ ZU2CG, ZU3CG, ZU4CG or ZU5CG MPSoCs:
Dual-core ARM® Cortex®-A53 MPCore Application Processing Unit +Dual-core ARM® Cortex®-R5 Real-Time Processing Unit

Xilinx® Zynq® Ultrascale+™ ZU2EG, ZU3EG, ZU4EG, ZU5EG, ZU4EV or ZU5EV MPSoCs:
Quad-core ARM® Cortex®-A53 MPCore Application Processing Unit +Dual-core ARM® Cortex®-R5 Real-Time Processing Unit

Memory
Soldered Down DDR4-2400 memory
Up to 8GB for Processing System Unit + up to 2GB for Programmable Logic
Graphics
Only on EG and EV MPSOcs:
Integrated ARM Mali-400 MP2 Graphics Processing Unit
Multicore 2D/3D acceleration at 667MHz
OpenGL ES 1.1 / 2.0, OpenVG 1.0 / 1.1
On EV MPSoCs only, H.264/H.265 integrated video codec
Video Interfaces
18- / 24-bit Dual Channel LVDS interface
DP interface
2 x CSI interfaces
Video Resolution
DP Up to 4096 x 2160
LVDS Dependent on the IP implemented in the programmable logic
Mass Storage

1 x external S-ATA Gen3 Channel
SD interface
QSPI Flash soldered-onboard
Optional eMMC 4.51 drive soldered on-board

Networking
Up to 2 x Gigabit Ethernet interfaces
USB

1x USB 2.0 OTG 
2x USB 2.0 Host 
2x USB 3.0 Host

PCI-e
PCI-e x4 interface
Audio
Dependent on the IP implemented in the programmable logic
Serial Ports

2 x UART Tx/Rx/RTS/CTS
2 x UART Tx/Rx
2 x CAN Bus

Other Interfaces

2 x I2C Bus
2 x SPI interfaces
12 x GPI/Os
Boot select signals
Power Management Signals

Power Supply
+3÷+5.25VDC
+3.3V_RTC
Operating System
Linux
Android
Operating Temperature

0°C ÷ +60°C (Commercial version)
-40°C ÷ +85°C (Industrial version)

 

*Measured at any point of SECO standard heastpreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

Dimensions
50 x 82 mm (1.97” x 3.23”)